Spectro Analyser

Spectro Analyser

Ranges: 0-10 vpm and 0-100 vpm Nitrogen in Argon
Display: Analogue meter
Limit of detection: Less than 1 vpm
Sensitivity: Less than 1 vpm
Zero drift: Less than 0.1 vpm per ºC
Cycle/response time: Continuous/90% within 60 secs
Accuracy: Depending on calibration gas available as it is a comparative method that is employed
Sample flow rate: 2 litres per minute
Sample inlet temperature: 10ºC minimum, 30ºC max.
Sample inlet pressure: Optimum 0.35 to 1.05 bar g; maximum 3.5 bar g
Sample outlet pressure: Maximum 0.15 bar g
Sample pipework: 6mm or 1/4 OD stainless steel and PTFE
Analogue output: 4-20 mA and 0-100 mV
Alarm contacts: Adjustable high and low alarms with both normally open and closed voltage free contacts rated at 250V, 5A, AC non inductive
Electrical supply: 110/220V, 60 Hz or 220/240V, 50 Hz single phase